$291.00
The K1 Electronic Temperature Indicator flashes an LED when the actual temperature inside a shipment is above or below the programmed threshold.
50 units / case
Features :
Certification
 |
 |
 |
NIST |
 |
| Specifications |
| Description | Specifications |
| Product Code | K1-1
K1-2 |
| Alarm Thresholds | K1-1 One Temperature threshold K1-2 Two Temperature thresholds |
| Sensor | Internal |
| Temperature Range | -40 ˚C to +80 ˚C (-40 ˚F to +176 ˚F) |
| Accuracy | ± 0.5 ˚C (± 1.0 ˚F) |
| Sensor Response Time | T90 of 5 minutes in moving air |
| Sensor Location | Internal |
| Preprogram Option | Factory programmed |
| Start Option | Push button |
| Stop Option | Yes, Push button |
| Size | 40x50x3 mm (with sleeve) |
| Weight | 6 grams |
| Case Material | Plastic sleeve |
| Battery | 3.0V |
| IP Rating | IP 67 |
| Other Certification | ISO9001:2008, RoHS |
The K1 Electronic Temperature Indicator flashes an LED when the actual temperature inside a shipment is above or below the programmed threshold.
50 units / case
Features :
Certification
|
|
|
NIST |
|
| New units Each block below is approximate ½ sec |
| Description | LED Action/s | Graphical representation |
| New K1 unit | Flashes every 3.6 seconds |  |
| Do not press (push button) until ready to start the unit |
| To START |
| Description | Action | Graphical representation |
| Press (push button) and hold it for 10-15 seconds | Solid lit (green) then Solid lit both
red & green LEDs |
 |
| Release button, K1 starting | Blink every 0.5 sec for 2.8 sec
(green) |
 |
| Description | Action | Graphical representation |
| Start delay(till delay time is met) | Flashes every sec, one after an-other (green then red) | 
|
| No start delay(or delay time is met) | Blinks once, every 6.8 second (green) |  |
During temperature excursions
| Description | Action | Graphical representation |
| Only Low temp. excursion In Total & Consecutive Delay | Two blinks every 4.8 second | 
|
| Only High temp. excursion In Total & Consecutive Delay | Two blinks every 4.8 second | |
| Only Low temp. excursion With or without Total & Consecutive Delay | Once every 6.8 seconds |  |
| Only High temp. excursion With or without Total & Consecutive Delay | Two blinks every 5.7 seconds | 
|
| Both High & Low temp. excursion With or without Total & Consecutive Delay | Three blinks every 4.8 seconds |  |
To STOP
| Description | Action |
Graphical representation |
| Press (push button) and hold it for 10-15 seconds | Solid lit (green) then Solid lit both
red & green LEDs |
|
| Release button, K1 stopping | Blink every 0.5 sec |  |
Alarm LED’s will keep blinking in respective pattern, until the battery drains
| K1 Battery Life |
| Status | Description | Estimated (years) |
| Shelf life | Not in use | 3 |
| During use | 1 Alarm/ 1 LED flash | 2.5 |
| 2 Alarm/ 2 LED flash | 2 | |
| 3 Alarm/ 3 LED flash | 2 |
Now you can pick one or two temperature thresholds between -40 °C & +80 °C and we will program K1 for you.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.